| Porous Plastics |
 |
 |
 |
|
POLYETHYLENE 50 MICRON POROUS FLUIDIZATION PLATES THESE SUPERIOR QUALITY FLUIDIZING PLATES BB2062-50 ARE MADE FROM ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE (UHMW PE), ALSO KNOWN AS FLUID BED PLATE FOR POWDER PAINT COATING, THE PRODUCT DELIVERS UNIFORM AIR DISTRIBUTION FOR DIFFUSING, AERATING AND FLUIDIZING MATERIALS.
THESE FLUIDIZING PLATES ARE EASILY INSTALLED, EITHER SIDE UP, WITH A MINIMUM OF EFFORT. MODIFICATIONS CAN BE MADE WITH REGULAR METALWORKING EQUIPMENT OR STANDARD HAND TOOLS. THE PLATES CAN BE SEALED IN PLACE WITH STANDARD RTV SILICONES OR THE EQUIVALENT.
THESE HIGHLY CHEMICAL INERT PANELS UTILIZE A NETWORK OF OMNI-DIRECTIONAL PORES FOR EFFECTIVE "TORTUROUS PATH" FILTRATION. THESE PANELS ARE AVAILABLE IN A VARIETY OF PORE SIZES OTHER THAN 50 MICRON UPON REQUEST. CONTACT US WITH THE DIMENSIONS YOU REQUIRE AND WE WILL PUT SOMETHING TOGETHER FOR YOU.
.
WE OFFER THE FOLLOWING:
• THICKNESSES FROM 1/4” TO 3/4” THICK • OVERALL DIMENSIONS TO 3’ TO 4’ ; LARGER SIZES CAN BE WELED. • AVAILABLE IN SQUARE, RECTANGULAR, STRIP, ROUND OR OVAL. • CUSTOM SIZED FOR YOUR APPLICATION – NO CUTTING, NO WASTE.
POLYPROPYLENE AND POLYETHYLENE POROUS TUBES THESE TUBES ARE MADE FROM UHMW POLYETHYLENE, PE CO-POLYMERS, OR POLYPROPYLENE WITH AN AVERAGE PORE SIZE FROM 5-200 MICRONS. STANDARD HYDROPHOBIC AND HYDROPHILIC FORMULATIONS ARE AVAILABLE TO ACCOMMODATE YOUR NEEDS.
OUR POROUS TUBE IS STRONG AT VARIOUS WALL THICKNESSES WITH THE ABILITY TO WITHSTAND HIGH LEVELS OF PRESSURE. ALSO THE PLASTIC MATERIAL IS RESISTANT TO MANY CHEMICALS AND A WIDE RANGE OF TEMPERATURES. OUR SPECIALIZED MANUFACTURING PROCESSES ALLOW US TO MAINTAIN A HOMOGENEOUS PORE STRUCTURE THROUGHOUT THE TUBE. THIS PROVIDES YOU WITH GREATER CONSISTENCY IN YOUR APPLICATION.
IF OUR STANDARD SIZES DO NOT MEET YOUR NEEDS, CUSTOM SIZES CAN BE ORDERED. YOUR CUSTOM SIZE PROTOTYPE SAMPLES WILL BE AVAILABLE QUICKLY. PRODUCTION QUANTITIES WILL BE SUPPLIED APPROXIMATELY 3-6 WEEKS AFTER PROTOTYPE APPROVAL.
POLYETHYLENE POROUS STAGED VENT PLUGS THESE POROUS POLYETHYLENE VENT PLUGS RANGING FROM 5 TO 10 MICRON ARE USED FOR IV VENTING. THESE VENT PLUGS ARE USED IN CONJUNCTION WITH IV LINES TO RELEASE VENUS PRESSURE IN THE LINES. THESE PRESSED INTO PLACE IN A “Y” CONNECTOR NEAR THE SKIN PUNCTURE SITE. THESE CAN ALSO BE PRESSED INTO AN INTERFERANCE FIT TO STABLIZE PRESSURE INSIDE OF A CONTAINER. THESE CAN ALSO BE PURCHASED WITH A SELF SEALING POLYMER THAT SWELLS UPON CONTACT WITH LIQUIDS FOR APPLICATIONS REQUIRING RAPID LIQUID SEALING PROTECTION.
..
...
POROUS PLASTIC LIQUID CHROMATOGRAPHY SOLID PHASE EXTRACTION (SPE) FILTERS ARE DESIGNED TO RETAIN MEDIA USED IN SOLID PHASE EXTRACTION COLUMNS FOR LABORATORY AND INDUSTRIAL CHEMICAL TESTING OF VARIOUS LIQUIDS. THESE FRITS ARE MADE FROM UHMW POLYETHYLENE OR PE COPOLYMERS WITH AN AVERAGE PORE SIZE FROM 5-50 MICRONS. STANDARD HYDROPHOBIC AND HYDROPHILIC FORMULATIONS ARE AVAILABLE TO SUIT YOUR NEEDS.
....
POLYETHYLENE HYDROPHOBIC POROUS PIPETTE TIP FRITS OUR PIPETTE FILTERS ARE USED FOR A WIDE VARIETY OF APPLICATIONS INCLUDING PCR®, DNA AMPLIFICATION AND SEQUENCING, FORENSICS, TISSUE CULTURE AND PROTOCOLS THAT INVOLVE PIPETTING VAPOROUS, RADIOACTIVE, BIOHAZARD OR CORROSIVE MATERIALS.
,,,,
|
